Target Traffic Patch - 1 Bag
Target logo Target

Traffic Patch

[No reviews yet] Write Review
  • SKU: 1177
  • Availability:

  • Shipping: Pick Up, Delivery

    Read More
PRICE $32.62
Addons: 0 selected + $(0.00)
Please make a selection to see the subtotal Subtotal: $0.00

Add On Items

Out of stock

TRAFFIC PATCH® consists of specially modified Portland cement and aggregates combined in closely controlled proportions to give a rapid setting material for the repair of concrete. The product meets the requirements of ASTM C928 for very rapid hardening concrete repair materials. The rapid strength gain properties are maintained at temperatures as low as 3 °C (37 °F). The product contains no calcium chloride or other admixtures likely to accelerate the corrosion of reinforcing steel. TARGET TRAFFIC PATCH is available in Fine and Coarse aggregate gradations. The TARGET TRAFFIC PATCH Fine incorporates polypropylene fibres and is intended for use in patches up to 25mm (1 inch) thick. The TARGET TRAFFIC PATCH Coarse incorporates 30mm long steel fibres and is designed for use in patches with thicknesses of more than 25mm (1 inch).

Available In:

  • 25 kg (55 lb) 56 bags/pallet
Uses:
  • TARGET TRAFFIC PATCH is designed for use as a repair material for cast-in-place or precast concrete where rapid setting and strength gain of the repair are required. Typical applications include patching of bridge decks, roads, curbs, sidewalks, parking decks and warehouse floors where the repaired area must be returned to normal service conditions within two hours of placing the repair mix.
Yield:
  • When mixed as directed, each 25 kg (55 lb) bag of TARGET TRAFFIC PATCH will yield approximately 0.43 ft³ (12.1 litres) of repair material.

Quick Notes:

Can be applied from a 1/2" up to 1" thick

Minimum surface temperature to be 3°C

Surface must be SSD

Horizontal application only

This product is rapid set and fiber reinforced. Can be used on applications for bridges, parkades, warehouse floors, cast in place concrete and precast concrete

Safety Data Sheet

Technical Data Sheet

SKU: 1177
Width: 20.47
Height: 4.72
Depth: 12.60
Description

TRAFFIC PATCH® consists of specially modified Portland cement and aggregates combined in closely controlled proportions to give a rapid setting material for the repair of concrete. The product meets the requirements of ASTM C928 for very rapid hardening concrete repair materials. The rapid strength gain properties are maintained at temperatures as low as 3 °C (37 °F). The product contains no calcium chloride or other admixtures likely to accelerate the corrosion of reinforcing steel. TARGET TRAFFIC PATCH is available in Fine and Coarse aggregate gradations. The TARGET TRAFFIC PATCH Fine incorporates polypropylene fibres and is intended for use in patches up to 25mm (1 inch) thick. The TARGET TRAFFIC PATCH Coarse incorporates 30mm long steel fibres and is designed for use in patches with thicknesses of more than 25mm (1 inch).

Available In:

  • 25 kg (55 lb) 56 bags/pallet
Uses:
  • TARGET TRAFFIC PATCH is designed for use as a repair material for cast-in-place or precast concrete where rapid setting and strength gain of the repair are required. Typical applications include patching of bridge decks, roads, curbs, sidewalks, parking decks and warehouse floors where the repaired area must be returned to normal service conditions within two hours of placing the repair mix.
Yield:
  • When mixed as directed, each 25 kg (55 lb) bag of TARGET TRAFFIC PATCH will yield approximately 0.43 ft³ (12.1 litres) of repair material.

Quick Notes:

Can be applied from a 1/2" up to 1" thick

Minimum surface temperature to be 3°C

Surface must be SSD

Horizontal application only

This product is rapid set and fiber reinforced. Can be used on applications for bridges, parkades, warehouse floors, cast in place concrete and precast concrete

Safety Data Sheet

Technical Data Sheet

Additional Information
SKU: 1177
Width: 20.47
Height: 4.72
Depth: 12.60

Usually buy together

!